ADASH Ltd.
Adash 3600-MPX
ADASH Ltd., Czech Republic, tel.: +420 596 232 670, fax: +420 596 232 671, email: [email protected]
For next technical and contact information visit www.adash.net, www.adash.cz
9
Fig. Interconnection of supply conductors
4. Connection of communication terminal connectors (485-A a 485-B) and interconnection (485-B,
485-AR) of the 3600-MPX module.
Fig. Interconnection of communication conductors
Fig. Interconnection position
The communication conductors are identified by the following colours
in the supplied set:
-
white conductor, signal A of RS-485
-
black conductor, signal B of RS-485.
5. Connection of terminal connectors of the output signal from the Adash 3600-MPX module (+OUT,
-OUT) to the input terminal connectors of the Adash 3600-MAIN module (+ICP, -ICP)
via a shielded
conductor
.
The shield is connected to the SHLD terminal connectors of both the modules.
The interconnection of the terminal connectors is as follows: +OUT to +ICP and –OUT to –ICP.
Pay attention to the correct connection
! In the event of a reverse connection of the OUT and ICP
terminal connectors, the Adash 3600-MAIN module will detect a vibration sensor error (ICP ERR).
