Replacing the Ethernet Bridge modem at the sign
MaxStream® XPress™ Wireless Ethernet Bridge Replacement Instructions
3 of 4
Replacing the Ethernet Bridge modem at the sign
Tools needed
•
5/32-inch hex tool (pn 68117076).
•
Screwdriver or other tool(s) depending on the how the Ethernet Bridge modem is mounted.
WARNING!
Hazardous voltage. Contact with high voltage may cause death or serious injury. Always
disconnect power to unit prior to servicing.
Disconnect all power to the sign at the power source.
NOTE:
If you are working on a back-to-back unit, disconnect power to the slave sign at the power source.
Open the controller section door (bottom left-most section):
Using a 5/32-inch hex tool to open the section door lock, turn counterclockwise and then pull the door toward you
.
1
2
Open the door slowly to prevent damage to internal components.
5/32-inch hex tool
(pn 6811-7076)
