Replacing the MASTER Ethernet Bridge modem
2 of 4
MaxStream® XPress™ Wireless Ethernet Bridge Replacement Instructions
Replacing the MASTER Ethernet Bridge modem
Connect the antenna to the new MASTER Ethernet Bridge modem.
Remove the antenna connection cap from the modem and screw on the antenna.
Disconnect the cables from the PoE adapter.
• Disconnect the Ethernet cable coming from the computer or network.
• Disconnect the power cord from the PoE adapter and unplug the power adapter from the wall.
• Disconnect the cable coming from the MASTER Ethernet Bridge modem.
Connect the cables to the new PoE adapter.
1
2
3
DATA IN
P+ DATA OUT
POWER
Connect the following to the PoE adapter:
A.
Connect the network cable from your computer (or
network) into the
DATA IN
.
B.
Connect the cable from the new Ethernet Bridge
modem labeled
MASTER
into the
P+ DATA OUT
port.
CAUTION!
Only connect the Ethernet Bridge
modem to the P+ DATA OUT
port. Connecting other devices to
this port may damage the
equipment!
C.
Connect the power adapter and plug in to an outlet
