Adaptive FAST 250 Скачать руководство пользователя страница 12

Страница: 12 / 20

Demo Mode

Demo Mode will allow you to select 1 of 6 Demo. The display will show DM for Demo Mode

and then a number. Change the number to the desired demo:

1 = Counts up and down from 51 to 59 and flashes

Demonstrates Dimming Feature

Shows “SLOW” Violator Alert

Shows “Red and Blue” Violator Alert

2 = Shows just “SLOW” Violator Alert

3 = Shows just “Red & Blue” Violator Alert

4 = Counts up and down from 31 to 39 flashes

Demonstrates Dimming Feature

Shows “SLOW” Violator Alert

Shows “Red and Blue” Violator Alert

5 = Scrolls RU2 Fast

6 = Snow Flakes

EX = Exit back to main menu

If the button is pressed during the Demo, the display will allow you to re-select another demo.

Show Serial Number Mode

Serial Number mode will display seven (7) two (2) digit numbers. This is your software serial number

Display Diagnostic Mode

Display diagnostic mode will make several patterns on the display used to test the display

integrity. Pressing the program button five (5) times while the display is blank just after The red

and blue test will exit and return to Main Menu.

Auto Intensity Diagnostic Mode

Auto Intensity Diagnostic Mode will test the ability to auto adjust the brightness of the display

according to the ambient light. A small sensor in the center of the sign reads the outside light

so the processor may determine how bright to make the display. Once in this mode, the

outside light can be varied and will show a number from 0 to 9, with 0 being the lowest and 9

the highest. Putting your hand over the sensor can change this reading.

Turning the Radar Acceleration Filter On and Off

Once this code is put in the display will show either an “On” or “Off”. “On” means the filter was

off and will now be turned on. “Off” means the filter was on and will now be turned off. We

recommend the Filter be “On” for most applications.

Turning the No Display Availability On and Off

This feature simply leaves the “ND” mode in or out of the main menu. “On” means the display

availability was off and will now be turned on. “Off” means the Display Availability was on and

will now be turned off. We recommend the Display Availability be “Off” for most applications.

Turning the Set Time Availability On and Off

This feature simply leaves the Set Time mode in or out of the main menu. “On” means the Set

Time Availability was off and will now be turned on. “Off” means the Set time

Adaptive Micro Systems LLC | 7840 North 86th Street | Milwaukee, WI 53224

Phone (800) 558-7022 | AdaptiveDisplays.com

Содержание FAST 250





















Результаты поиска

Содержание FAST 250

Отзывы:

Похожие инструкции для FAST 250

Бренды по названию

Популярные бренды

Adaptive FAST 250, Руководство пользователя

Результаты поиска

Содержание FAST 250

Отзывы:

Похожие инструкции для FAST 250

Бренды по названию

Популярные бренды