Adaptive ALPHA 200 Series, Руководство по программированию

Страница: 40 / 68

ALPHA Remote Control Programming Manual
34 Advanced text messaging
Using the largest fonts
Once in a while you may want to use very large fonts in order to
create a message that fills all the lines of a sign. (On a 1-line sign this
always happens because there is only a single line.)
To use the largest fonts available on a sign, position the sign’s cursor
to the middle of the display and then select the font:
24
Using CAPS and SHIFT
when needed, type This
is SS7
25
Press RUN twice to see what you’ve typed.
Step When you do this... You see this...
1
Delete all the messages currently stored in the sign.
(See “Clearing a sign’s memory” on page 5 or “Example 5 — Deleting messages” on page 21.)
2
Press PROGRAM .
3
Press ADV .
4
Press CURSOR until the
sign’s cursor moves to
the middle.
5
Select the HOLD mode.
(Hold down SHIFT and
press 5 .)
6
Press FONT until the
largest font size
appears.
A] [HLD][SS7]This is SS7
PROGRAM
TEXT FILE A
:
A] :
A]
:
A]
[HLD]
A]
[HLD][SF16]
On a Series 4000 sign, [SF16] and [SS16] are the largest fonts.
(On a Series 7000 sign, the largest fonts are [SF24] and
[SS24].)