Installation Guide
Note to installers:
Due to the wide variety of wall structures, materials and mounting methods, the installing contractor must exercise proper judgment in selecting
the mounting area and hardware.
As a guide, the installation, when complete should be capable of supporting 5 to 10 times the actual applied load. Always use a backup safety
system such as a safety cable.
To assure a trouble-free installation, read through and follow these instructions carefully before beginning. If you have doubts about the integrity of
the structure you are mounting to or you are not sure about the proper hardware to use, consult a structural and/or hardware specialist.
Caution: Due to the wide variety of structures, environments, materials and rigging methods, the installing contractor must exercise good
judgment in selecting the proper mounting area and hardware.
Adaptive Technologies Group
1635 E. Burnett Street | Signal Hill, CA 90755 USA
Ph: 562.424.1100 | Fax: 562.424.3520
www.adapttechgroup.com
ALWAYS INSTALL SAFETY CABLES
WARNING:
Mounting and/or suspension of audio and video equipment requires
experienced professionals. Improperly installed loudspeakers can result in property
damage, personal injury and/or liability to the installing contractor.
Step 17:
Figure 5 Install the two m10x 50mm long
eyebolt on the side rigging inserts of the selected
upper Figure 4 speakers Install the two m10x35 mm
long on the rear rigging inserts of the EVF1181S or
to the rear rigging insert of the bottom EVF1152S
(depending on the desired tilt angle) for pull back
points (Figure 5).
Step 18:
Check all hardware connections before
hoisting cluster.
FP-EVH1152-2X1
ELECTRO-VOICE CLUSTER PACK PLANAR ARRAY KIT
