U s e r ’s G u i d e : U S B X ch a n g e
•
2 6
When I power off/on my SCSI device while still connected to
USBXchange, the system does not detect the USBXchange or the
SCSI device appears to be missing. How can I correct this problem?
Try one of these steps:
1
Remove and reinsert the USBXchange from the USB port.
2
Remove the USBXchange, power off and on the SCSI devices and
reinsert the USBXchange.
3
Remove and then reattach the USBXchange to the SCSI device.
4
Restart the system with the USBXchange attached and the SCSI
devices powered on.
5
Shut down the system, remove the
USBXchange
, power off and on
all SCSI devices and reinsert the
USBXchange
.
Restart the system
when the USBXchange
is reattached.
6
Run the Uninstall utility before reinstalling the driver. See
Uninstalling the USBXchange Driver for Windows 98 and Windows
2000 on page 12 for more information.
If you continue to have problems after trying the steps listed in this
section, go to Adaptec’s World Wide Web site at
http://ask.adaptec.com
.
If you still cannot find answers to your questions, call the numbers listed
for Adaptec Customer Support on page 28.
