U s e r ’s G u i d e : U S B X ch a n g e
•
1 5
Your external DC power jack can be plugged into the DC input jack
connection located on the side of the USBXchange.
Installing the USBXchange on a Macintosh
Installing the Driver Software
1
Power up your Macintosh and insert the enclosed USBXchange
Installer CD-ROM in the CD-ROM drive.
2
Double-click on the USBXchange Installer application:
3
Follow the instructions displayed on the screen.
4
After installing the driver software, restart your Macintosh, then
proceed to the instructions on connecting SCSI devices to the
USBXchange.
Note:
The USBXchange should be disconnected from the computer
before following the instructions for Connecting a SCSI Device
on page 16.
Connect a DC power
jack to the USB
Xchange
if you need an external
power supply
