Adaptec SLIMSCSI 1460, Руководство пользователя

Страница: 22 / 38

16
SlimSCSI 1460 Adapter User’s Guide
Terminating the SCSI Bus
To ensure reliable communication on the SCSI bus, terminators must
be installed (or enabled) on the devices at the physical ends of the
SCSI bus. The terminators on all devices between the physical ends
must be removed (or disabled). Termination on the SlimSCSI 1460 is
permanently enabled, since it is always at one end of the SCSI bus.
There are various methods for terminating disk drives and other
SCSI devices. Read the device documentation if you are not sure
how to do this. Here are some general guidelines for termination:
■
Termination is usually controlled by installing or removing a
SCSI terminator. On some SCSI devices, termination is con-
trolled by setting a switch on the back of the device, as shown
in the illustration on page 4.
■
Most SCSI devices come from the factory with termination
enabled.
Obtaining SCSI Cables
You will need additional SCSI cables if you connect more than one
SCSI device to your SlimSCSI 1460. It is important to use high-
quality cables to ensure that data is read and written correctly.
Adaptec provides high-quality SCSI cables designed specifically for
use with the SlimSCSI 1460. For purchasing information, contact
Adaptec at 1-800-442-7274, Monday to Friday, from 6 a.m. to 5 p.m.
(Pacific Time).
1
See the free cable offer on the card included in this User’s Guide
External SCSI Cables
PCMCIA 26-pin to High-Density 50-pin Cable
PCMCIA 26-pin to Centronics 50-pin Cable
PCMCIA 26-pin to DB25 Cable
1