Adaptec Storage Manager GUI, they may not really be deleted.
Reboot the controller; then, issue the ARCCONF DELETE command
again.
--------------------------------------------------------------------
7. Other Issues and Notes
- While a drive is being cleared, do not try to include it in a
new logical device. Doing so may cause unpredictable results.
- If you initialize one or more drives in a snapshot source drive,
the snapshot target cannot be deleted. To avoid creating a
snapshot drive that cannot be deleted, you must delete the
snapshot target first, before you initialize the drives in
the snapshot source. Note that you can only delete a snapshot
with the CLI.
--------------------------------------------------------------------
(c) 2008 Adaptec, Inc. All Rights Reserved. This software contains
valuable trade secrets of Adaptec or its licensors. The software is
protected under international copyright laws and treaties.
This software may only be used in accordance with the terms of its
accompanying license agreement. No part of this publication may be
reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording or
otherwise, without prior written consent of Adaptec, Inc.,
691 South Milpitas Blvd., Milpitas, CA 95035.