4.4 Windows Vista Business and Ultimate (64-bit versions)
- Flashing a RAID controller on Windows Vista 64-bit systems
is not supported in this release of Adaptec Storage Manager.
NOTE: Although you can run the image update wizard from
Adaptec Storage Manager on a Windows Vista 64-bit
system, the wizard does not run to completion.
4.5 Linux
- When you delete a pool, the operating system can no longer see
the last pool. WORKAROUND: To allow Linux to see the last pool,
restart your system.
- The controller does not support attached CD drives during OS
installation.
- To remotely manage a Linux system from a Windows system, you must
use the standalone GUI.
- If you cannot connect to a local or remote Adaptec Storage Manager
installed on a Linux system, verify that the TCP/IP hosts file
is configured properly.
1. Open the /etc/hosts file.
NOTE: The following is an example:
127.0.0.1 localhost.localdomain localhost matrix
2. If the hostname of the system is identified on the line
with 127.0.0.1, you must create a new host line.
3. Remove the hostname from the 127.0.0.1 line.
NOTE: The following is an example:
127.0.0.1 localhost.localdomain localhost
4. On a new line, type the IP address of the system.
5. Using the Tab key, tab to the second column and enter the
fully qualified hostname.
6. Using the Tab key, tab to the third column and enter the
nickname for the system.
NOTE: The following is an example of a completed line:
1.1.1.1 matrix.localdomain matrix
where 1.1.1.1 is the IP address of the server and
matrix is the hostname of the server.
7. Restart the server for changes to take effect.