9
S
TEP
2
Connect one end of the external SCSI cable to the 50-pin high-
density external connector on the Adaptec SCSI Card 29160N.
Connect the other end of the external SCSI cable to a SCSI connector
on the back of the external SCSI device. If you are installing only one
external device, terminate the device and skip to Step 4.
4
4
S
TEP
1
nal device, you will need to obtain a 50-pin external SCSI cable. Follow
these steps to connect your standard external devices:
50-pin External High
Density SCSI Cable
50-pin High-density Fast/
Ultra-SE External Connector
External Fast/Ultra-SE SCSI Connector
(50-pin)
Use the external Fast/Ultra-SE SCSI connector to connect your stan-
dard external SCSI devices that have 50-pin connectors. For each exter-
To connect a second Fast SCSI or Ultra Narrow
SCSI device, plug the middle
connector of the cable to
the device. The
device must not be
terminated.
Terminated SCSI Device
S
TEP
4
Unterminated SCSI Device
512512final.qxd 12/17/99 2:05 PM Page 9
