4
Insert the Adaptec SCSI Card 29160N into the PCI expansion slot;
press down firmly until it clicks into place, then replace the slot cover
screw.
If you refer to the device’s documentation for installation
instructions, be sure to return to this document to continue with
installation of the software driver.
N
OTE
There are several things you need to do to your SCSI devices before
you connect them to the Adaptec SCSI Card 29160N:
• Set the SCSI IDs
• Set the termination
• Connect the power cables.
Since setup can vary from device to device, always refer to the device’s
documentation for specific instructions.
Below are some guidelines for setting SCSI IDs and termination on
your devices. Refer to the Adaptec SCSI Card 29160N User’s Reference
for additional information on SCSI IDs and termination.
S
ETTING
U
P
SCSI D
EVICES
S
TEP
4
Adaptec SCSI Card
29160N Installed in
a PCI Expansion Slot
512512final.qxd 12/17/99 2:05 PM Page 4
