39
Changing the Set-up of Your WLAN
Enabling the Power Saving Mode
You can enable the Power Saving Mode if you want your Wireless
PCI Adapter to enter sleep mode when not transmitting data.
To enable Power Saving Mode:
1
Open the Adaptec Wireless Utility. See
2
Click the
Configuration
tab.
3
In the Power Saving Mode drop-down box, select
Enabled
, as
shown above.
4
Click
Apply Changes
, then click
OK
to close the Adaptec
Wireless Utility.
Adjusting the Transmit Threshold Control
Settings
Changes to the Transmit Threshold Control settings can affect
overall network performance. Adaptec
highly recommends
that these
settings be left at their default values.
