24
Removing the Adapter
Removing the Adapter
You must use the Unplug or Eject Hardware Wizard to properly
disconnect your DuoConnect for Notebooks adapter from your
computer.
To disconnect the adapter:
1
Stop and disconnect all devices connected to the adapter. (Refer
to your devices’ documentation for instructions, if required.)
2
Click the
Unplug or Eject Hardware Wizard
icon
(shown at right) on your system tray, which is in the
bottom right corner of your screen.
3
Click
Texas Instruments OHCI Compliant IEEE 1394 Host
Controller
, then click
Stop
.
Your system stops all four controllers on your DuoConnect for
Notebooks adapter. A message appears telling you that the
device has been stopped.
4
Click
OK
.
It is now safe to remove your DuoConnect for Notebooks
adapter.
