sudo dpkg -i aacraid-1.2.1-xxxxx-Ubuntu-all.deb
Ubuntu 11.x and Ubuntu 12.x:
sudo dpkg -i aacraid-1.2.1-xxxxx-Ubuntu11.04+11.10+12.04-all.deb
4. Reboot your computer to ensure the driver loaded correctly.
5. Continue with
Managing Your Storage Space
on page 64.
Installing on Solaris
To install the driver on Solaris:
1. Start your computer.
2. (Solaris 10 only) Check for any pre-existing Adaptec driver by running
pkginfo SUNWaac
in a
terminal window . If there is no pre-existing Adaptec driver on your computer, continue with
Step
3
. If an Adaptec driver is already installed on your computer, run
pkgrm SUNWaac
to remove it.
Caution: If your operating system currently boots from the Adaptec controller,
do not reset your computer after you remove the pre-existing Adaptec driver.
Instead, follow the steps in this section to install a new driver before rebooting
your computer.
3. Insert and mount the driver disk:
volcheck
4. Change to the driver installer directory:
Solaris 10:
cd /rmdisk/aacraid/DU/sol_210/i86pc/Tools
Solaris 11:
cd /rmdisk/aacraid/DU/sol_211/i86pc/Tools
5. Start the driver installer:
./install.sh -i
6. Remove the driver disk, then reboot your computer.
7. Continue with
Managing Your Storage Space
on page 64.
Installing on FreeBSD
To install the driver on FreeBSD:
1. Start your computer.
2. Insert and mount the driver disk:
mount -t msdos /dev/fd1 /mnt
3. Copy the driver package to the /tmp directory:
cp /mnt/aac8x-i386.tgz /tmp
4. Install the driver package:
pkg_add /tmp/aac8x-i386.tgz
5. Remove the driver disk, then reboot your computer.
6. Continue with
Managing Your Storage Space
on page 64.
61
Proprietary and Confidential to PMC-Sierra, Inc.
Document No.: CDP-00277-02-A Rev. A, Issue:
Serial Attached SCSI RAID Controllers Installation and User's Guide