4. Insert the RAID controller into the expansion slot and press down gently but firmly until it clicks into
place. When installed properly, the RAID controller should appear level with the expansion slot.
Caution: Touch a grounded metal object before handling the RAID controller.
5. Secure the bracket in the expansion slot, using the retention device (for instance, a screw or lever)
supplied with your computer.
6. Attach the supercapacitor module to the RAID controller by inserting the connector into the socket
on the flash module daughterboard, as shown in the figure below. The connector attaches to the
socket in only one direction.
39
Proprietary and Confidential to PMC-Sierra, Inc.
Document No.: CDP-00277-02-A Rev. A, Issue:
Serial Attached SCSI RAID Controllers Installation and User's Guide