Adaptec 5325302057 - Snap Server 750i NAS, Руководство пользователя

Страница: 157 / 236

Recovering from an iSCSI Storage Appliance Failure
Chapter 12 Solving Problems 151
4
Continue adding user names and passwords until all users are included on the
list.
Note
The user list must have at least one name on it.
5
Click
Cancel
to close the window.
6
Repeat Step 2 to 5 for each logical device with CHAP authentication.
7
Click
Next
, then click
Next
again.
8
Click
Apply
, then click
Yes
.
Removing iSCSI Targets and Adding the Appliance IP Address
1
On the iSCSI Storage Host, go to the
Start
menu and open
Microsoft iSCSI
Initiator
.
The iSCSI Initiator Properties window opens.
2
Click the
Targets
tab, then log off any iSCSI target whose status is ‘Reconnecting’.
3
Click the
Persistent Targets
tab, then remove any iSCSI target whose status is
‘Inactive’.
4
Click the
Discovery
tab.
5
From the list of IP addresses, remove any address that does not belong to the
iSCSI Storage Appliance.
6
Click
Add
.
7
Enter the IP address for the iSCSI data port on your iSCSI Storage Appliance (as
set in “Step 2: Configuring the iSCSI Storage Appliance” on page 36), then click
OK
.
If your iSCSI Storage Appliance has two iSCSI data ports, repeat this step for the
other port.
Logging into the iSCSI Targets
1
In the iSCSI Initiator Properties program, click the
Targets
tab.
2
Select an iSCSI target, then click
Log On...
.
3
Select
Automatically restore this connection...
.
If CHAP is enabled on this iSCSI target, click
Advanced
, select
CHAP logon
information
, enter the user name and password (‘target secret’) for that iSCSI
target, then click
OK
.
Note
The target secret is the password you set in “Removing iSCSI Targets and
Adding the Appliance IP Address” on page 151.
4
Click
OK
to log on to the iSCSI target.