Adaptec 5325301507 - Snap Server 4400 NAS, Руководство администратора

Страница: 31 / 250

Connecting to the Server for the First Time
Chapter 1 Administrative Overview 15
The server number is a unique, numeric-only string that appears on a label
affixed to the chassis.
• On the SnapServer 410 and N2000, the server label is located on the top of the
chassis in the left front corner.
• On the SnapServer 110 or 210, the label is on the underside of the chassis.
• To obtain the server number for SnapServer 4200 and 4500, remove the front
bezel to read the label.
2
Connect to the server.
In a Web browser, enter the following URL:
http://SNAP nnnnnn
(where nnnnnn is the server number)
Press
Enter
. The Web View screen opens.
3
Log into the Administration Tool.
Click the
administration
link, and in the login dialog box, enter admin as the user
name and admin as the password, and then click
OK
.
4
Complete the Initial Setup Wizard.
For instructions for using the Initial Setup Wizard, see page 16.
To Connect to a SnapServer Using SSM
1
Install and launch SnapServer Manager.
Install and launch SSM (see page 12) on a machine residing on the same network
segment as your SnapServer(s). Upon startup, SSM displays the IP address of
each SnapServer on its local network segment.
2
If using a DHCP server, skip to the next step. Otherwise:
In the SSM console, right-click a server name and select
Set IP Address
. At a
minimum, enter an IP address for the SnapServer and a subnet mask, and then
click
OK
.
3
Launch the Administration Tool from the SSM console.
In the SSM console, right-click a server name and select
Launch Web
Administration
.
4
Log into the Administration Tool.
Click the
Administration
link, and in the login dialog box, enter admin as the user
name and admin as the password, and then click
OK
.
5
Complete the Initial Setup Wizard.
For instructions for using the Initial Setup Wizard, see the next section.