Adaptec 5325301507 - Snap Server 4400 NAS Скачать руководство пользователя страница 102

Страница: 102 / 250

Configuring iSCSI Initiators

SnapServer Administrator Guide

In System B's

/etc/iscsi.conf

, enter the following:

DiscoveryAddress=192.3.2.193

Username=b

Password=PasswordForB

System A and B can connect to their own iSCSI disks on the same SnapServer (IP

address 192.3.2.193) without the possibility of data corruption caused by sharing

the same iSCSI disk.

iSCSI Configuration for Novell NetWare

Consider the following information before implementing iSCSI on NetWare

servers:
• NetWare 6.5 with SP1 for NetWare is required, and the iSCSI packages must also

have been installed using the Custom Install method to utilize the NetWare iSCSI

initiator.

• The server initiating the connection should be a P-III or higher with a minimum

of 512MB of RAM and a GbE adapter. To validate the NetWare server’s ability to

communicate with the SnapServer, ping the SnapServer from the NetWare

server.

• With GuardianOS 5.0, CHAP authentication is supported on NetWare 6.5, SP7.

Note

CHAP authentication is not supported on versions of NetWare 6.5 earlier

than SP7, nor is it supported on pre-GuardianOS 5.0 systems.

• iSCSI implementation requires configuration using the NetWare Remote

Manager or the command line in the Server Console.

For more information regarding installation and configuration of required NetWare

components, refer to the documentation included with the Novell initiator

distribution.

iSCSI Configuration for VMware

Note

GuardianOS 4.2/4.3, SP2 or higher is required to configure iSCSI disks with

the VMware Initiator.
When you install VMware ESX Server or vSphere Server, the iSCSI Initiator is

automatically installed.
On connecting to the SnapServer targets, the VMware ESX 3.5 Server initiator will

find all iSCSI disks and automatically log into them. If iSCSI disks are shared across

multiple servers, you can use CHAP authentication to restrict the number of iSCSI

disks the VMware initiator can access. See “Creating iSCSI Disks” on page 91 for

more information. The VMware vSphere 4.0 Server initiator provides the option for

Содержание 5325301507 - Snap Server 4400 NAS



























































































































































































































































Результаты поиска

Содержание 5325301507 - Snap Server 4400 NAS

Отзывы:

Бренды по названию

Популярные бренды

Adaptec 5325301507 - Snap Server 4400 NAS, Руководство администратора

Результаты поиска

Содержание 5325301507 - Snap Server 4400 NAS

Отзывы:

Бренды по названию

Популярные бренды