- When setting advanced options for an iSCSI initiator, Adaptec
Storage Manager and the CLI use different names for the same
option: 'Separate status PDU' and 'Piggybacking of SCSI status',
respectively.
- Drive numbering in Adaptec Storage Manager and the CLI is not
consistent. Adaptec Storage Manager uses the drive's WWN
(World Wide Name). The CLI uses the drive's device ID.
- When creating snapshots of one or more volumes, the Microsoft VSS
provider may timeout, resulting in an incomplete snapshot set.
- Exporting and importing a pool on the same system is not supported.
- Do not export a pool with the CLI EXPORT command while it is
rebuilding or synchronizing. It will appear as an 'alien' pool
when you move it to a new enclosure. You cannot import an
alien pool.
- Be patient when importing a foreign pool with the CLI IMPORT
command. It may take up to 3 minutes for the system to recognize
the drives and verify the meta data before the pool appears in
the pool list.
- In the Adaptec Storage Manager Properties panel, some properties
for enclosure management devices (JBODs) are blank (unpopulated).
- On rare occasions, Adaptec Storage Manager may report that there
is insuffient space to create a mirror plex. WORKAROUND: Press F5
to refresh; then, try again.
- A recurring job that creates and mounts a snapshot on the same
drive will fail on the second and all subsequent attempts.
WORKAROUND: Free the drive before the next attempt.
- When you create or reassign a volume, Adaptec Storage Manager
includes network drives (mapped by all users of the same
machine) in list of mount points. If the drive is already in
use, the mount operation fails.
- A managmenent service with two NICs can be added to the
Adaptec Storage Manager Enterprise view twice.
- In a Microsoft two-node cluster environment, mirrored failover
with the Adaptec MPIO DSM fails.
--------------------------------------------------------------------
(c) 2006 Adaptec, Inc. All Rights Reserved. This software contains
valuable trade secrets of Adaptec or its licensors. The software is
protected under international copyright laws and treaties.
This software may only be used in accordance with the terms of its
accompanying license agreement. No part of this publication may be
reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording or
otherwise, without prior written consent of Adaptec, Inc.,
691 South Milpitas Blvd., Milpitas, CA 95035.