Adaptec 2940U2W - Storage Controller U2W SCSI 80 MBps, Руководство пользователя

Страница: 22 / 42

16
SCSI Card 2940U2W User’s Reference
Starting SCSI
Select
Follow these steps to start SCSISelect:
1
Turn on or restart your system.
During the startup process, pay careful attention to the mes-
sages that appear on your screen.
2
When the following message appears on your screen, press the
Ctrl-A
keys simultaneously (this message appears for only a
few seconds):
Press <Ctrl><A> for SCSISelect (TM) Utility!
3
From the menu that appears, use the
↑
and
↓
keys to move the
cursor to the option you want to select, then press Enter.
1
Setting is valid only if Multiple LUN Support is enabled.
2
Settings are valid only if host adapter BIOS is enabled.
Send Start Unit Command Yes, No Yes (Enabled)
BIOS Multiple LUN Support Yes, No No (Disabled)
Include in BIOS Scan Yes, No Yes (Enabled)
Advanced Host Adapter Settings:
“Plug-and-Play” SCAM Support Enabled, Disabled Disabled
Reset SCSI Bus at IC Initialization Enabled, Disabled Enabled
Extended BIOS Translation for
DOS Drives > 1 GByte
2
Enabled, Disabled Enabled
Host Adapter BIOS Enabled, Disabled Enabled
Support Removable Disks Under BIOS as
Fixed Disks
2
Boot Only,
All Disks, Disabled Boot Only
Display <Ctrl> <A> Messages during BIOS
Initialization
2
Enabled, Disabled Enabled
BIOS Support for Bootable CD-ROMs
2
Enabled, Disabled Enabled
BIOS Support for Int 13 Extensions
2
Enabled, Disabled Enabled
Table 1. SCSISelect Settings (Continued)
SCSISelect Option Available Settings Default Setting