Adaptec 19160, Руководство по установке

Страница: 9 / 20

7
Adaptec SCSI Card 19160
You can connect up to 15 SCSI devices to the Adaptec SCSI Card
19160. Before connecting devices, be sure to review Setting Up
SCSI Devices on page 5. For additional details on connecting
devices, refer to the Adaptec SCSI Card 19160 User’s Reference.
Connecting Internal LVD (Ultra160 and Ultra2) SCSI
Devices
Connect internal LVD SCSI devices to the internal LVD/SE
connector on the Adaptec SCSI Card 19160. To do this, use a
68-pin internal LVD cable like the one shown in Step 1 below.
Follow these steps to connect the devices:
Locate a 68-pin internal LVD SCSI cable, which should have
twisted wires as shown below to support LVD devices.
C
ONNECTING
SCSI D
EVICES
We recommend that you keep your LVD SCSI devices
separate from your SE (Ultra SCSI) devices. This allows LVD
SCSI devices to transfer data at their maximum speed. (See
Bus Segments on the Adaptec SCSI Card 19160 on page 2.)
N
OTE
S
TEP
1
Terminated End Nonterminated End
ASC-19160_IG.book Page 7 Wednesday, December 1, 1999 12:47 PM