Adaptec 19160, Руководство по установке

Страница: 8 / 20

6
Installation Guide
an LVD or Auto switching terminator built into the end of cable.
With this type of cable, it is not necessary to terminate individual
internal LVD SCSI devices. If your cable does not have a termina-
tor built-in, you must add a terminator to the end of the cable.
Terminating Fast/Ultra SCSI Devices
On most internal Fast/Ultra SCSI devices, the termination setting
is controlled by setting a jumper or a switch, or by physically
removing or installing a resistor module(s). If you are using an
internal SCSI cable that has a built-in terminator, you must dis-
able termination on all internal devices connected to the cable.
On most external Fast/Ultra SCSI devices, termination is con-
trolled by installing or removing a terminating plug. For more
information, refer to the documentation for each SCSI device.
Mount the Devices
If you have internal SCSI devices, mount each device in an avail-
able drive bay inside your computer, as shown below. Refer to
your computer and device documentation for instructions on
installing devices inside your computer.
External LVD devices are not supported by the Adaptec
SCSI Card 19160.
N
OTE
Internal SCSI Device
Mounted in Drive Bay
ASC-19160_IG.book Page 6 Wednesday, December 1, 1999 12:47 PM