Adaptec 1822100, Справочник

Страница: 30 / 38

24
Adaptec SCSI Card 19160 User’s Reference
■
All Disks —All removable-media drives supported by the
BIOS are treated as hard disk drives.
■
BIOS Support for Bootable CD-ROMs —(Default: Enabled )
When set to Enabled , the SCSI card BIOS allows the computer
to boot from a CD-ROM drive.
■
BIOS Support for Int 13 Extensions —(Default: Enabled ) When
set to Enabled , the SCSI card BIOS supports Int 13h extensions
as required by Plug-and-Play. The setting can be disabled if
your computer does not support Plug-and-Play.
Using SCSI Disk Utilities
To access the SCSI disk utilities, follow these steps:
1 Select the SCSI Disk Utilities option from the menu that
appears after starting SCSI Select . SCSI Select scans the SCSI bus
(to determine the devices installed) and displays a list of all
SCSI IDs and the devices assigned to each ID.
2 Use the arrow keys to move the cursor to a specific ID and
device, then press
Enter .
3 A small menu appears, displaying the options Format Disk
and Verify Disk Media.
■
Format Disk —Allows you to perform a low-level format
on a hard disk drive. Most SCSI disk devices are preformatted
at the factory and do not need to be formatted again .
Caution:
A low-level format destroys all data on the
drive. Be sure to back up your data before performing
this operation. You
cannot abort a low-level format
once it has started.
■
Verify Disk Media —Allows you to scan the media of a
hard disk drive for defects. If the utility finds bad blocks on
the media, it prompts you to reassign them; if you select
yes , those blocks are no longer used. Pressing Esc at any
time aborts the utility.