Adaptec 1822100, Справочник

Страница: 23 / 38

17
Configuring the Adaptec SCSI Card 19160 with SCSISelect
Configuring the
Adaptec SCSI Card 19160
with SCSI
Select
SCSI Select, included with the Adaptec SCSI Card 19160, enables you
to change SCSI settings without opening the computer or handling
the card. SCSI
Select also enables you to low-level format or verify
the disk media of your SCSI hard disk drives. The following table
lists the available and default settings for each SCSI
Select option.
Note: The default settings are appropriate for most systems.
Run SCSI Select if you need to change or view current set-
tings, or if you would like to run the SCSI disk utilities. See
the descriptions of each option starting on page 19.
SCSI Select Options Available Settings
Default
Setting
Basic Host Adapter Options:
Host Adapter SCSI ID 0-15 7
SCSI Parity Checking Enabled/Disabled Enabled
Host Adapter SCSI Termination:
LVD/SE Connector Automatic/
Enabled/Disabled Automatic
SE Connector Automatic/
Enabled/Disabled Automatic
Boot Device Options:
Boot SCSI ID 0-15 0
Boot LUN Number
1
0-7 0