Installing EZ-SCSI Deluxe in Windows NT4.0
2-1
2
Installing EZ-SCSI Deluxe in Windows NT 4.0
You can install EZ-SCSI Deluxe in Windows NT 4.0 in several ways. Before
proceeding to the instructions appropriate for your computer setup, please read the
Pre-installation
Tips.
Pre-installation Tips
Windows NT 4.0 must be installed before you install EZ-SCSI Deluxe. If you need to
install Windows NT 4.0, but can’t access your CD-ROM drive, go to DOS Installer.
∗
If you installed a new host adapter, go to Installing Windows NT 4.0 Drivers first,
and then continue to Installing EZ-SCSI Deluxe in Windows NT 4.0.
∗
Installing EZ-SCSI Deluxe in Windows NT 4.0
∗
Follow the instructions appropriate for your computer setup.
Using Your CD-ROM Drive
1
Start Windows NT 4.0.
2
Insert the SOYO CD into the CD-ROM drive.
3
In the start up screen, click [Install drivers].
4
Select “EZ-SCSI” and click [OK].
5
Follow the instructions that appear on each screen.
Tip
If the Master setup window doesn’t appear automatically, your windows NT 4.0
Autorun setting is probably disabled. Follow these instructions.:
1
Click the [Start] button, and then click [Run].
2
Type <CD-ROM drive letter> :\drivers\EZ-SCSI\setup.exe in the Run window.
For example:
d:\drivers\EZ-SCSI\setup.exe
3
Click [OK] to enter the Master Setup window.
