Installing EZ-SCSI Deluxe in Windows 95
1-1
1
Installing EZ-SCSI Deluxe in Windows 95
Installing Windows 95 Drivers
You can install EZ-SCSI Deluxe in Windows 95 in several ways.
Before proceeding to the instructions appropriate for your computer setup, please read
the
Pre-installation
Tips.
Pre-installation Tips
∗
Windows 95 must be installed before you install EZ-SCSI Deluxe. If you need to
install Windows 95, but can’t access your CD-ROM drive, go to DOS
Installer
.
∗
If you installed a new SCSI CD-ROM drive and want to use it for installing EZ-
SCSI Deluxe, see
Using a New SCSI CD-ROM Drive
.
∗
If you installed a new non Plug-and –Play host adapter*, AHA-2940AU, or Ultra
PCI host adapter, go to Installing Windows 95 Drivers first, and then continue to
Installing EZ-SCSI Deluxe in Windows 95
.
Installing EZ-SCSI Deluxe in Windows 95
Follow the instructions appropriate for your computer setup.
Using Your CD-ROM Drive
1.
Start Windows 95.
2.
Insert the SOYO CD into the CD-ROM drive.
3.
In the start up screen, click [Install drivers].
4.
Select “EZ-SCSI” and click [OK].
5.
Follow the instructions that appear on each screen.
Tip
If the Master Setup window doesn’t appear automatically, you Windows 95 Auto
Insert Notification setting is probably disabled. Follow these instructions.