Adaptec 131U2 - AAA RAID Controller, Инструкция по установке и эксплуатации оборудования, Страница: 65 / 82

A-3
Using SCSISelect and Disk Utilities
Starting the SCSI
Select
Utility
To start SCSISelect, press the F6 key when the following prompt
appears when you turn on or reboot your system:
Press <F6> for SCSISelect (TM) Utility!
The menu that appears displays the options Configure/View Host
Adapter Settings and SCSI Disk Utilities, as shown in Figure A-1.
Using SCSI Select Menus
To select a SCSISelect menu option, move the cursor to the option
with the
↑
and
↓
keys, then press Enter. In some cases, selecting an
option displays another menu. You can return to the previous menu
at any time by pressing Esc.
To restore the original SCSISelect default values, press F6 from the
Configure/View Host Adapter Settings screen. To toggle the display
between color and monochrome modes, press F5 from the main
SCSISelect screen (this feature does not work on some monitors).
Exiting SCSI Select
To exit SCSISelect, press Esc until a message prompts you to exit (if
you changed any host adapter settings, you are prompted to save
the changes before you exit). Select Yes to exit, then press any key to
reboot the system. Any changes you made in SCSISelect take effect
after the system boots.
Adaptec Array1000 Family SCSISelect(TM) Utility
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (*=default)
Would you like to configure the PCI device, or run the
SCSI disk utilities? Select the option and press <Enter>.
Press <F5> to switch between color and monochrome modes.
Adaptec Array1000 Family at Bus:Channel 00:A
Options
Configure/View Host Adapter Settings
SCSI Disk Utilities
Figure A-1. SCSI Select Menu