Adaptec 131U2 - AAA RAID Controller, Инструкция по установке и эксплуатации оборудования, Страница: 55 / 82

5-5
Installing the Software Driver for Novell NetWare
Note:
Older versions of the aic78xx.dsk driver (before v1.30)
are compatible with cda1000h.ham as long as the
AAA-131U2/133U2 PCI slot is not specified on the com-
mand line (e.g.,
load aic7870.dsk slot=z ). If there is an
AIC-78xx based card (e.g., AHA
™
-2940) in the system, z
must point to that card’s slot number and not to the
AAA-131U2/133U2 slot number. If loaded without com-
mand line parameters, NetWare lists valid slot numbers.
The AAA-131U2/133U2 will be listed in the parameter list;
however, do not select it.
NetWare 5.0
Follow these instructions only if you are installing NetWare 5.0 for
the first time:
1
Create a DOS partition and install DOS on your.
2
Copy the aspi8u2.sys and aspicd.sys files from the \dos direc-
tory on the Adaptec Array1000U2 Family Manager Set driver
disk to a directory (e.g.,
c:\scsi ) on your hard disk.
3
When using a SCSI CD-ROM, edit the config.sys file to include
command lines for aspi8u2.sys and aspicd.sys . The following
sample command lines for the config.sys file are appropriate for
most systems:
device=c:\scsi\aspi8u2.sys /d
device=c:\scsi\aspicd.sys /d:aspicd0
Note:
For non-Ultra2 systems, use aspi8dos.sys
instead of aspi8u2.sys in the command line (for exam-
ple, device=c:\scsi\aspi8dos.sys /d).