Fitting Instructions for Ritekey 30-01. Rev 3 June 2005.
3. To Change the Master Code
• Enter the default or old master code and wait for the LED to come on.
• Enter the default or old master code for a second time and wait for the green to come on.
• Press keys 00 and wait for the red LED
• Enter the new master code and the green LED will flash in standby.
• Write down the new master code and keep it in a safe place. Do not use the master code as a user code.
• The green LED will flash in standby.
4. To Create/Change the User Code
• Enter the 4 or 5 digit master code and wait for the red LED to come on.
• Enter the master code for a second time and wait for the green LED to come on.
• Press any two keys i.e. 01 to 50 to store the User Code Position Number and wait for the red LED to come on.
• Enter the new User Code, which must consist of 4 digits for a 4 digit master code and 5 digits for a 5 digit master code.
Regardless of the number of digits, do not use the master code as a user code. Do not use the same User Code for other
User Code Position Numbers.
• Write down the new 2 digit User Code Position Number and the new 4 or 5 digit User Code number.
5. Changing the Delay for the Back to Standby Mode
• Enter the Master Code and wait for the red LED to come on.
• Enter the Master Code for a second time and wait for the green LED to come on.
• Enter the code 66 and the green LED should be lit.
• Press any two keys from 01 to 99 for the new time delay (01 being 1 second and 99 being 99 seconds).
• The green LED will then flash in standby.
6. To Change the Duration of Door Latched Mode
• Enter the master code and wait for the red LED to light.
• Enter the master code for the second time and wait for the green LED to light.
• Press keys 71, and the green LED will light.
• Press any two keys from 01 to 99 for the new time delay in minutes (01 being 1 minute and 99 being 99 minutes).
• The green LED will then flash in standby.
7. To Change the Duration of Door Unlocked Mode
• Enter the master code and wait for the red LED to light.
• Enter the master code for the second time and wait for the green LED to light.
• Press keys 77, and the green LED will light.
• Press any two keys from 01 to 99 for the new time delay in seconds (01 being 1 second and 99 being 99 seconds).
• The green LED will then flash in standby.
8. To Delete all User Codes from Positions 01 to 50
• Enter the master code and wait for the red LED to light.
• Enter the master code for the second time and wait for the green LED to light.
• Press keys 88, and the red LED will light for approximately 3 seconds.
• The green LED will then flash in standby.
9. To Change the Duration the Exit Button Override Mode
• Enter the master code and wait for the red LED to light.
• Enter the master code for the second time and wait for the green LED to light.
• Press keys 99, and the green LED will light.
• Press any two keys from 01 to 99 for the new time delay in seconds (01 being 1 second and 99 being 99 seconds).
• The green LED will then flash in standby.
6
