Fitting Instructions for Ritekey 30-01. Rev 3 June 2005.
Terminal block shown in position as shipped, note
its position with the cable entry pointing away
from the PCB. (The wall of the keypad is
particularly removed for clarity).
Fig.3 Position of Terminal Block
Fig.4 Diagram Showing PCB Connectio
ns
Remove the terminal block from the PCB, which separates from
the terminal pins by pulling on the terminal block.
As the terminal block is lifted away it will reveal the functions of
the different pins written onto the PCB as shown in fig. 4
Make the connections to the terminal block as per the diagram
and refit the terminal block to the PCB. Please take care to refit
the block the correct way around with the cable entry pointing
away from the PCB as shown in diagram 3.
Fig 5. Connecting the Cable Run and
Block to the Keypad
DOOR C
EXIT B
RETURN
COM
N/O
N/C
POWER
AC/DC
11-16V
2
