ADAMEX AMELIA, Руководство пользователя

Страница: 18 / 36

SHOCK-ABSORPTION
The pram is provided with the cushioning spring, whose hardness
can be adjusted by means of a special switch (fig. 12
, 45 ). Not
available in models: Massimo.(fig. 12)
AIR WHEELS
The pram is available in air wheels. Maximum tyre pressure is 0.5
atmosphere.
MOUNTING AND DISMOUNTING OF THE CARRY COT
CAUTION! Before proceeding with the using of pram, make sure
that the carry cot is mounted correctly and locked on both sides of
the pram.
CAUTION! Do not fold the pram chassis when the carry cot is
mounted on it. The carry cot can be mounted on the pram chassis
facing forward or rearward to the direction of the travel. In order to
mount the carry cot on the pram chassis, insert the hitches into the
slots on both sides of the chassis until an audible click is heard.
In order to remove the carry cot from the pram, get hold of the
hitches on both sides of the carry cot, press the longitudinal push
buttons located there, and while holding them pressed, pull the
carry cot upward (fig. 13).
ADJUSTMENT OF THE BACKREST OF THE CARRY COT
The carry cot backrest adjustment mechanism is located under
the carry cot from the side of the bumper. In order to lift the
backrest press and turn the mechanism to the left and in order to
lower the backrest, press and turn the mechanism to the right (fig.
14).
CARRY COT CANOPY
The carry cot is equipped with the permanently fixed canopy. In
order to change its position, press the push buttons on both sides
of the canopy at the same time and select the required angle (fig.
15). The canopy is fixed to the top of the carry cot by means of a
zipper. The canopy is equipped with the handle that is used to
transfer the carry cot and with the sun roof folded to the inside.
Only part of the upholstery of the canopy may be removed by
undoing the zippers, owing to which the ventilation space is
increased (fig. 16)
CARRY COT COVER
The carry cot is equipped with a cover, which is secured by means
of snaps located on both sides of the canopy, or additionally by
closing the zipper around the carry cot.
(fig. 17).
MOUNTING AND DISMOUNTING OF THE SPORT SEAT
CAUTION! Before proceeding with the using of the pram, make
sure that the sport seat is mounted and locked correctly on both
sides of the pram.
CAUTION! Do not fold the pram chassis when the sport seat is
mounted on it. The sport seat may be mounted on the pram
chassis facing frontward or rearward to the direction of the travel.
In order to mount the sport seat on the pram chassis, fit its hitches
into the slots on both sides of the pram (fig. 18). The locking is
automatic. In order to dismount the sport seat, get hold of the
hitches on both sides of the sport seat, press the longitudinal push
buttons located there and while still holding them, pull the sport
seat up (fig. 19).
ADJUSTMENT OF THE SPORT SEAT BACKREST
The backrest is adjusted in 4 positions. We raise it by lifting it to the
required position (fig. 20). In order to lower the backrest, pull the
handle at the back of the sport seat and adjust the required
position (fig. 21).
CAUTION! While adjusting the sport seat backrest, pay particular
attention to the hands and head of the child.
SPORT SEAT CANOPY
The sport seat is equipped with the removable canopy. In order to
dismount it, insert its hitches into the handles intended for this
purpose on both sides of the sport seat chassis (fig. 22). In order
to remove the canopy, press the hitches on both sides of the sport
seat and remove them from the slots (fig. 23). The canopy is
equipped with the handle that is used for transferring and with the
sun roof folded to the inside. Only part of the upholstery of the
canopy may be removed by undoing the zippers, owing to which
the ventilation space is increased (fig. 24) Adjustment (fig. 25)
SPORT SEAT COVER
The sport seat is equipped with the cover, which is to be mounted
by attaching its snaps to the snaps located on both sides of the
canopy (fig. 26).
FOOTREST
The footrest is equipped with the height adjustment function. In
order to raise the footrest, lift it up (fig. 27). In order to lower the
footrest, press and hold the push buttons on both sides of the
footrest and adjust the required position (fig. 28).
BUMPER
The sport seat is equipped with the safety bumper. We mount it by
inserting its hitches into the slots intended for this purpose on both
sides of the sport seat (fig. 29). In order to remove the bumper,
press the red push buttons on the outer side of the sport seat
sides and take out the bumper from the slots (fig.30).
CAUTION! Always use the bumper together with the crotch strap,
when the child is placed in the sport seat.
SAFETY BELTS
CAUTION! Always use the safety belts when the child is placed in
the sport seat. The pram is equipped with 5-point safety belts.
After placing the child in the sport seat, fasten the belts, pressing
their forks into the central clasp (fig. 31
a ), and then tighten the
belts in buckles. In order to release the belts, press the forks in
and remove from the clasp (fig. 3
1b ). In order to fit the belts, pull
the rectangular stopper sewn up at the end of each belt through
the appropriate holes in the upholstery and the plastic shell of the
seat, and then pull the belt to check whether it has been fastened
properly (fig. 32).
RAIN COVER AND MOSQUITO NET
The pram is equipped with a universal rain cover placed on the
carry cot or sport seat. As part of the equipment, also a separate
mosquito net and a rain cover are available (figs. 33 and 34).
BAG
The pram is equipped with a bag for accessories. We attach it to
the pram guide by means of clips (fig. 35).
CAR SEAT
CAUTION! In order to mount the car seat on the pram, first fit in
the adapters into the pram slots.
CAUTION! Before mounting the car seat, make sure that the
adapter is mounted correctly on the pram chassis.
CAUTION! The car seat is intended for children with the body
mass up to 11 kg.
MOUNTING AND DISMOUNTING OF THE CAR SEAT
ADAPTERS
Fit the adapter into slots on both sides of the pram until an audible
click is heard (fig. 36). The adapter is dismounted in the same
manner as the carry cot.
MOUNTING AND DISMOUNTING OF THE CAR SEAT.
In order to mount the car seat, attach it to the adapter slots (fig.
37). In order to remove the car seat, pull the levers on its both
sides and pull the car seat up (fig. 38).
CAUTION! Before proceeding with the use of the pram make
sure that the car seat is mounted properly.
COVER AND CANOPY OF CAR SEAT