Adamczewski AD-MM 400 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 30

Adamczewski AD-MM 400 Скачать руководство пользователя страница 5

2 Security

2.1 Intended use

WARNING

Damage

The operating and maintenance instructions in this operating
manual and maintenance conditions must be strictly adhered to.

The AD-MM 400 is intended for connection to an RS-485 interface on the other de-
vices are connected.

The AD-MM 400 can be connected to a PC or laptop via the configuration interface.

The AD-MM 400 is intended for installation in front panels of control cabinets.

The AD-MM 400 has a connection for the supply voltage and can be connected with
An alternating voltage up to 250V AC or 24V DC.

Any other use is not intended! Unauthorized modifications and alterations On the prod-
uct lead to considerable safety risks and are eliminated Security reasons prohibited! For
damages resulting therefrom or for damages Adamczewski elektronische Messtechnik
GmbH is not liable for unauthorized use.

Faults which can affect the safety are immediate remove! The installer must give the
operator the operating instructions make available. Installer and operator must provide
the operating instructions beginning their activities.

2.2 Predictable misapplication

This product may not be used in any of the following cases:

•

In potentially explosive atmosphere. Operating in potentially explosive atmo-
spheres Sparks may cause fires, fire or explosions.

•

Use in humans and animals.

2.3 Safe Handling

This product is state of the art and recognized safety rules. Each device is activated
before delivery and safety.

5

«
...
3
4
5
6
7
...
»

Содержание AD-MM 400































Отзывы:

Нет отзывов