The following parameters are available to configure the displays.
INFO
Default values of the AD-MM 400
The AD-MM 400 contains as default values exemplary settings
with which the data of the AD-LU 30 GT can be displayed as
slave.
Name
Standardvalue
Range
Unit
Lines
1
1 ... 4
Show
Show
Do not show,
Show
Label
1
0 ... 20
Character
Display line1
1
1 ... 40
Display line2
1
1 ... 40
Display line3
1
1 ... 40
Display line4
1
1 ... 40
1
The exemplary data of the AD-LU 30 GT are not shown because of the better overview.
The ’Rows’ parameter determines the number of rows displayed in this view. The
’Display’ parameter determines whether a display is displayed or not. The indices of
the display lines to be displayed are determined with ’Display line1’ ... ’Display line4’.
6.2.2 display lines
A display line can currently display numeric values ??only as a numeric display. Other
types of presentation, such as bar charts or time charts, are planned.
Numeric Values Display
The numerical display shows the numerical value together with the physical unit and
other information. The size of the font is determined automatically depending on the
number of display lines. The distribution of the display line is shown in the following
figure.
Figure 6.10: Splitting the display line into areas
21