Adam 31102500, Руководство пользователя, Страница: 5 / 12

1)
2) 3)
5 TELESCOPIC CEILING MOUNT
→ Before attaching the telescopic boom E to the mounting plate A ,
make sure that its inner part is secured with at least one of the
lens screws
C so that it cannot fall out (see fig. 1).
→ Place the telescopic boom E on the support plate cylinder B and
secure it with 4 of the lens screws C . Tighten the lens screws
with retaining ring F . The torque should be 15 Nm (see fig. 2 and 3).
→ Adjust the height of telescopic boom E and secure its inner part.
Only use these settings whilst no other accessory or speaker
system is attached to the ceiling mount.
– Secure the telescopic boom E at its lower opening with one
hand so that its inner part doesn‘t fall out.
INSTALLING