6
MOUNTING BRACKET FOR ADAM S3H
→ Do not place the speaker system into the desired angle of
inclination until it is fully connected to the mounting bracket and
the rest of the assembly / accessories from ADAM Audio.
→ The maximum possible angle of inclination depends on the
mounting hole you choose and the direction in which you are
tilting the monitor towards.
→ Once the desired inclination is achieved, tighten the screws until
the speaker is fixed at its tilt angle.
→ If you use the mounting bracket to suspend the monitor from
a horizontal surface or a supporting beam, make sure that the
surface or supporting beam has the load bearing capacity
required for the total weight (monitor and mounting hardware),
also, be sure to observe possible leverage effects taking
into account the installation and safety instructions of the
supporting beam.
→ If necessary, attach additional mounting accessories from
ADAM Audio (see graphic design overview on page 8) to the
mounting bracket. Always refer to these assembly and safety
instructions, which are enclosed with the accessories.
→ If different positions are possible, attach the mounting hardware
to the mounting bracket in such a way that it produces the least
possible leverage. As a rule, this is the case when you attach the
mounting accessories to the center of the mounting bracket.
