Adam Equipment WBW 15aM, Руководство пользователя

Страница: 9 / 28

© Adam Equipment Company 2011 7
3.3 SETTING UP
•
The WBW Series comes with a stainless steel pan. Place it on
the top if already not installed.
•
Do not press with excessive force as this could damage the load
cell inside.
•
Level the scale by adjusting the four feet. The scale should be
adjusted such that the bubble in the spirit level is in the centre of
the level and the scale is supported by all four feet.
•
Attach the power supply module to the bottom of the scale and
plug into the mains.
•
Press the [O/I] key to start. The scale will first display the
software revision, followed by a self-test.
•
At the end of the self-test it will display zero weight, if the zero
condition has been achieved and the weighing unit that was in
use last. A stable and zero symbol indicators are also displayed.
Attach Power Supply
module here