Adam Equipment WBK 165a, Руководство пользователя

Страница: 35 / 44

Page 33
The parameters available are:
“F4 Int”
Initial Zero Range
“F5 rEZ”
Re-Zero range
“F6 SCS”
Successive Tare Enable
“F7 Cnt”
Display the A/D counts
“F8 Zem”
Zero Mode
“F9 Lvd”
Low voltage detection
“FA AZn”
Auto Zero Range
“Fb FPS”
User Function Password
The description of the parameters is shown below
USING THE SERVICE PARAMETERS
F4 –INITIAL ZERO RANGE
To enter this parameter, press the [
0/T     ] key when
“F4 int”
is shown.
The display will show the current initial zero range.
Press the
[Pcs/]
key to change the value and press [ 0/T     ] to accept the
value.
Press
[Print/M+/esc]
to return to weighing.
F5 -RE-ZERO RANGE
To enter this parameter, press the [ 0/T     ] key when
“F5 rEZ”
is shown.
The display will show the current re-zero range.
Press the [Pcs/ ] key to change the value.
Press [
0/T 
 
 ] to accept the value.
Press [Print/M+/esc] to return to weighing.
F6 -SUCCESSIVE TARE
To enter this parameter, press the [ 0/T     ] key when “
F6 SCS”
is shown.
The display will show if the successive tare is on or off.
Press the [Pcs/ ] key to change the value.
Press [
0/T     ] to accept the displayed value.
Press [Print/M+/Esc] to return to weighing.
F7 –ADC COUNTS
To enter this parameter, press the [ 0/T     ] key when
“F7 Cnt”
is shown.