Adam Equipment PMB, Инструкция по эксплуатации, Страница: 27 / 84

󰀲󰀵 󰀲󰀵
| | P a g e P a g e © Adam Equipment Company 2010 © Adam Equipment Company 2010
Start Method Start Method
The last setting is the Start method. The analyzer will either start a test
The last setting is the Start method. The analyzer will either start a test
automatically whenever the cover is lowered (after a 5 second delay to allow
automatically whenever the cover is lowered (after a 5 second delay to allow
stability),
stability), or or manually manually when when the the [Start] [Start] key is pressed. key is pressed.
Display Display will will show show “START” “START”
Options Options are are “Manual” or “Auto” “Manual” or “Auto”
Print Control Print Control
To allow the analyzer to print the results during the test. If the print is set to
To allow the analyzer to print the results during the test. If the print is set to
ON the analyzer will also store the results to memory using the file name
ON the analyzer will also store the results to memory using the file name
given given by by the user. the user. See S See Section 7.0 ection 7.0
Display will show Display will show
Options Options are are “On” or “Off” “On” or “Off”
The display then changes to the format of the print test. The display then changes to the format of the print test.
Options Options are are “Complete “Complete ” ” or or “Summary “Summary ” ” test test results. results. See See section section 11.3 11.3
After setting the last parameter press After setting the last parameter press
[[
 
   
 
0/T 0/T
 
   
 
/ Esc] / Esc]
to return to normal to return to normal
weighing and weighing and ready ready to begin to begin a new a new test. test.
MANUAL MANUAL
start start
PRINT TEST PRINT TEST
0n 0n
FORMAT FORMAT
C0MP C0MP
FORMAT FORMAT
SUMM SUMM