@Adam Equipment Company 2004
4
2.2 BATTERY OPERATION
When battery goes low, the reading will keep on flickering. It is the time
to charge the battery with the special charger. If the scale is being used
without proper charging, the display will flicker and after 30 minutes the
display will show “
”. If you still don’t charge the battery, the scale
would be shut down automatically after 5 seconds of warning, in order to
protect the battery. Charge the battery immediately.
If you do not use the crane scale for a long time, you may need to
charge the battery every three months.
2.3 CHARGING BATTERY
Use the special charger to charge battery, using other type of charger
may cause harm to the battery.
Please ensure your AC power meets the required rating of power.
The LED on charger will turn on when battery is being charged and it will
be flickering when battery is fully charged.
After the full charging, the AC adapter will automatically switch over to
the low current charge process, so that it is not necessary to disconnect
the AC adapter immediately.
2.4 BASIC OPERATIONS
Power on and off- Press
[ON/OFF]
key to on and off the scale.
Zero the scale- When there is no item on the scale but the reading is not
zero, press the
[ZERO]
key to re-zero the reading.
Reading lock- When reading is not stable, you can use the
[LOCK]
key
to lock the reading, so that you can read easily. After you finish reading,
press
[LOCK]
again to return to normal weighing mode.
Change division- You can use the
[CHANGE]
key to change division, All
scales have been set for the middle division in the factory.
Overload Warning- Please do not add any item that exceeds the
maximum capacity of the scale. When the display shows
, remove
the item to avoid damage to the load cell.
Содержание CRW Series
Страница 2: ...Adam Equipment Company 2004...
