Adam Equipment CKT 16, Руководство по обслуживанию

Страница: 9 / 22

© Adam Equipment Company 2020 6
3.0 OPERATION
3.1 SETTING UP AND TURN ON THE SCALE
Follow this set up when using the scale for first time:
1) Place the platform in the locating holes on the top cover.
2) Level the scale by adjusting the four feet. Ensure the bubble in the spirit
level is in the centre of the level and the scale is supported by all four
feet.
3) Attach the power cable to the connector located on the base to the left
of the scale.
4) Plug the power cable into the mains.
5) Press the power button located on scale keypad.
6) The scale will then display the software revision and run a self-test.
7) Once the self-test has been completed and a stable condition achieved,
the scale will display zero weight alongside stable and zero symbol
indicators.
4.0 INTERNAL COMPONENTS
4.1 OPENING THE SCALE
The scale can be opened by unscrewing the 5 designated points located beneath the scale:

2 next to the battery

2 at the front of the scale

1 in the centre next to the recharge board.