Adam Equipment CKT 16, Руководство по обслуживанию

Страница: 16 / 22

© Adam Equipment Company 2020 13
9.8 P-ZERO
The Power Zero function can be used to set the zero limit when turning the scale on.
To enter this parameter, press the [Tare]
↵
key when “p-zero” is shown.
Use the numeric [1] or [6] keys to alternate between the options and press [Tare]
↵
to select.
Note: Trade approved machines require this to be set in accordance with specific
rules.
9.9 K-ZERO
The key-zero function is used to set the key zero range.
To enter this parameter, press the [Tare]
↵
key when “k-zero” is shown.
Use the numeric [1] or [6] keys to alternate between the options and press [Tare]
↵
to select.
Note: Trade approved machines require this to be set in accordance with specific
rules.
9.10 AUTO/ ZERO TRACKING
The auto-zero function calculates the limits at which the scale can be brought back to zero.
To enter this parameter, press the [Tare]
↵
key when “Auto - 2” is shown.
Use the numeric [1] or [6] keys to alternate between the options and press [Tare]
↵
to select.
Note: Trade approved machines require this to be set in accordance with specific
rules.
9.11 CAPACITY
This parameter allows you to set the weighing capacity limit.
To enter this parameter, press the [Tare]
↵
key when “Capa” is shown.
Use the numeric [1] or [6] keys to alternate between the options and press [Tare]
↵
to select.
9.12 COUNT UNIT
This parameter allows you to set the weighing/ counting unit.