Adam Equipment CBK 100a, Руководство пользователя

Страница: 10 / 20

EN
© Adam Equipment Company 2017
8
4.0 PARAMETERS
Pressing the [Func] key allows the user to access the parameters for customising the scale. The parameters
are split into 3 groups- Check weighing parameters, RS-232 parameters and Scale parameters. Please find
the RS-232 parameters in complete manual.
When [Func] is pressed, display will first show
“FUnC 1”
for Check weighing parameters. Enter [2] for RS-232
parameters or [3] for Scale parameters or press the [Func] key to advance through the groups
“FUnC 1”
,
“FUnC 2”
and
“FUnC 3”
. Press [Tare] to enter the desired group of parameters.
Press [Zero] to return to the group
“FUnC 1”
. If you press [Zero] again, the scale will exit the User Parameter
section and return to normal weighing.
4.1 CHECK WEIGHING PARAMETERS
Shortcut to enter this group is to press and hold the [Func] key for 4 seconds. The display will go directly to
“FUnC 1”.
Press [Tare] to enter the group. Press [Func] to view the options for setting. Press [Tare] to
confirm the change and then advance to the next parameter by pressing the [Func] key.
Parameter
Description Options Default
setting
F1 PCt This parameter allows the user to
enter the Percent weighing Function.
See Section 10.7.
None Enabled
always
F2 LLk This parameter prevents the normal
user from changing the limits with the
help of a Limit Lock.
With LLK set to Off (
oFF
), the
user is allowed to change limits
at any time.
With LLK set to Preset (
PSt
), the
user is allowed to use one of the
preset limits only.
oFF
F3 LEd This parameter sets the LED
indicator to off or on and the LED
type (whether LED’s are on in the
form of a continuous bar or a spot
LED).
bAr
- Bar type
Spot
- Spot type
oFF
- Off
bAr
F4 bEP This parameter sets the Beeper to off
or on. If set to on, the beeper can
further be set to sound when the
weighing result is within or outside
the check-weighing limits. bP oFF
- Off
bP inL
- Within limits
bP otL
- Outside limits (>20d)
bP inL
F5 CPS
(Not available
in CBK-M)
This parameter allows setting of a
new Check weighing password, must
be entered twice when asked. When
complete, it will display “
donE
”.
To be entered manually.
0000
F6 Nck
(Not available
in CBK-M)
This parameter enables negative
check weighing function with ability to
do negative tare. on
oFF on
NOTE:
The Check weighing password is separate from the scale password, If the password is other than
0000, user must enter the password to gain access to
“
F2 LLk
”, “
F3 LEd
”, “
F4 bEP
”, “
F5 CPS
”
and “
F6 nCK
”.