Adam Equipment CBD Series, Руководство по обслуживанию

Страница: 13 / 22

@Adam Equipment Company 2007
11
Use [U.Wt/Unit] to select the decimal
point position and press [Print].
To change the remote scale cap press
CE to clear and then enter new value
followed by
[Print].
“
CAp
”. Scale capacity setting.
“dESC” “ 0.00”
“SEL” “0060”
Press the [U.Wt/Unit] to go to next
menu. Press [Print] to enter.
Use [U.Wt/Unit] to select the division
which you would like the display to
increment in followed by
[Print].
“div”
weighing division.
“inc 5”
Press the [U.Wt/Unit] to go to next
menu, use [Print] key to enter.
Use [U.Wt/Unit] to increment the
values then [Print].
“Azt”
Autozero tracking range.
Select from
0.5d, 1d, 2, 4,d
Press the [U.Wt/Unit] to go to next
menu, use [Print] key to enter.
Use [U.Wt/Unit] to increment the
values then [Print].
“0 Auto”
Zero auto range at
power on.
Select form
0%, 2%, 5%, 10%
or
20%
Press the [U.Wt/Unit] to go to next
menu, use [Print] key to enter.
Use [U.Wt/Unit] to increment the
values then [Print].
“0
manl
” Zero manual range.
Select form
0%, 2%, 4%, 10%, 50%
or
100%
Press the [U.Wt/Unit] to go to next
menu, use [Print] key to enter.
Enter the new PIN number and press
[Print].
Confirm the new PIN number and
press
[Print].
“
Pin
” Password number for “
tEch
”.
“Pin1”
“Pin2”
“donE”
Press [U.Wt./Units] to continue or
escape the parameters with the
[zero/Tare]