Adam Equipment AEA Series, Руководство оператора

Страница: 12 / 24

© Adam Equipment Company 2000 12
The result of the liquid density test is shown the display automatically after the completion of
the procedures. Measurement result can sent through the RS 232 interface to a printer or PC
by pressing:
To begin enter the Density menu (M6) as above and select the M6 01 Liquid Density
Option.
Set the cursor next to
M6 04 Run
With F enter mode Density
OR
Enter the Density mode immediately regardless of the cursor position.
1. Enter Density Mode
2. Weigh the float in the air and when result are stable press Enter