EN
© Adam Equipment Company 2013
9
700660189RevD1-Jul13
3.3
CHARGING
BATTERY
•
Plug the power supply into the mains power, then into the back of the
IHS scale.
•
The red indicator lamp will illuminate to indicate that the battery
charger is functioning properly.
•
The green indicator lamp will illuminate to indicate that the battery
fully charged.
3.4
BASIC
OPERATIONS
Power on and off- Press
[On/Off]
key to turn on the scale
. Then the display on
the scale will show
[88888]
. Press again to turn off the scale.
Zero the scale-Depress the
[Zero]
to re-zero the reading.
Change division- you can use the
[Change/lb/kg]
key to change division.
Lb/kg- you use this to select either lb or kg weighing units
Hold -when required, such as when the reading is not stable or you cannot pause
to record a reading, you can use the
[Hold]
key to lock the reading, so that you
can read it easily later, after you finish reading, press
[Hold]
again to return to
normal weighing mode.
Note:
The
[Hold]
key has no affect if the Hold parameter has been disabled. See
section 5.1
