ADA INSTRUMENTS ZSM 330, Руководство по эксплуатации

Страница: 5 / 22

ZSM 330
OPERATION INSTRUCTIONS
1. Battery installation
Unscrew the screw nut, insert the battery ,than fasten the screw.
. Operation Instruction
After insert the battery, press the red button to start the tool,after displayed all in the screen 3 seconds, then shows reading, if shut down manu-
ally, press and hold the side button for 3 seconds to shut down .
MAX: Press this button,the screen will display the MAX ,it display the MAX value until now,then press the button again to exit this mode.
MIN: Press this button,the screen will display the MIN ,it display the MIN value until now,then press the button again to exit this mode.
3. Operation Notes
1. Keep the device away from vibration source and high power EMF places. The ambient temperature should be stable.
2. Put on a wind shield in gentle breeze(to avoid wind noise), stop measuring when the wind is resh breeze or stronger.
3. Keep away from the ground and walls, to avoid echo.
4. To avoid damages to the instrument, do not use it near following places:
a. EMF places, Electro-magnetic fields: such as arc welders, induction heaters.
b. High temperature objects
c. Static environment
Notes
Please read this manual thoroughly before operate the unit.
Please do not remove any label from the unit.
Avoid sudden shock and dropping.
Keep away from direct sunlight, heat/cool source and strong air drift places.
•
•
•
•