ADA INSTRUMENTS ZHT 100 (6 in 1), Руководство по эксплуатации

Страница: 7 / 26

ZHT 100 (6 in 1)
7
battle only, power off the unit manually and then power on the unit, the screen will display “Er2” for 3 seconds. After two calibrations are
finished, the unit will work normally when power on.
Battery Safety Instructions
● Please remove the batteries when clean the product.
● Remove the batteries before long term storage
● Please install the batteries properly as the instructions of the positive and negative charges
● Please dispose the batteries properly. High temperature will cause explosions and do not burn the batteries. Strap insulated tape around the
battery charges to avoid unsafe contacts with other objects. Many countries have regulations about the batteries disposing. Please follow the
local regulations of battery disposing.
Cautions
● Don’t drop the product or use by force.
● Don’t disassemble the product to avoid failure.
● Close the protection cap when not in use.
● Don’t place the product with corrosive gas or objects.
● Keep the unit dry and clean.
● Avoid dust and water, which may stain the unit.
● Don’t immerse the product into water, which will result in damage to product..
● Check the battery regularly to avoid to go bad.
● Please remove the battery, if it is not for use for a long time.