ADA INSTRUMENTS DigiTeo-10, Руководство по эксплуатации, Страница: 14 / 58

MEASUREMENT FOUNDATION
14
Digi Teo-2/5/10/20
Memory mode (DigiTeo-2)
Operating Display
Press [V%], power on, come in
the memory mode.
●
The first line will display the
effective data in the memory.
Press [REC], the second line will
glint , and the instrument output
the data to the interface, until it
finished, it will not glint.
Press [HOLD], the first line
will glint, you should press
[HOLD] in 5 seconds , you
will delete all the data, after
this , the instrument exit from
the memory mode.
● In the memory mode, press [SFT], exit from the memory mode,
return to the angle mode.
Function setting
This series instrument have many functions. You can select
what you need, and you can select and set the mode.
1. the compensator of the vertical angle: ON, *OFF
2. the vertical level 0: *90° (OFF), 0° (ON)
3. power off automatic: ON, OFF (if there is no operation
after 20 minutes, it will power off).
4. the minimum angle display: *1”, 5”, 10”
5. setting the baud rate: 1200, 2400, 4800, *9600
6. select the record: *interface (OFF), memory (ON)
7. correction the level: (ON), *(OFF)
8. buzzer: OFF, *ON
9. select the angle unit: 00°00’00’’ *(360), gon (400 gon)
Options marked with “*” are the factory default settings.
1. Function setting method
The function keys:
[OSET] - select the item circularly
[HOLD] - select the time item circularly (month, date, year,
hour, minute)
[L/R] - select the upwards item or the time add 1
[V%] - select the downwards item or the time minus 1
[SFT] - confirm the setting, exit the setting mode, return to
the angle mode